Full range: Horn loaded labyrinth: 2.2m ( 7" – 4") length Full range driver: Custom designed 7 inch paper cone w/whizzer Foam surround Voice coil dia.: 32mm Sensitivity: 99 db/w/m at 1khz, or mean averaged from 200hz to 2khz Bass: Sealed Isobaric chamber: 18,4 lit. volume. Bass labyrinth: 1.4m ( 4' – 8" ) Bass drivers: Custom designed; 3 units per enclosure 6.5 inch paper cone coated fabric surround Voice coil dia: 25 mm Sensitivity ( of each driver ): 91 db/w/m Bass module amplification: one monobloc per enclosure FET amplifier Max. output: 210 wpc @ 4 ohms. System: Loudspeaker sensitivity: 102 db/w/m. Nominal impedance: 8 ohms. Frequency response: 18 Hz to 20 Khz. Minimum amplification power: 2 wpc Dimensions: H x D x W : 1040mm ( 3'-5" ) x 730mm ( 2'-4 ½" ) x 215mm ( 8.5" ) Weight per enclosure: 40 kg ( 88 lbs ) Shipping weight per set ( 4 cartons, plus palette ): 120kg ( 264 lbs )
Demo Stock one pair only at this very low price $14,500 Australian
The Groove Plus SRX MK1 model is given its name by the fact that it features a super resolution "SR" front end and adjustable loading "X" board, and has been described as on the best phono stages in the world. The Groove Plus SRX is the result of over 10 years of research. This included developing Lithos voltage regulation, which is 3 times faster, 1000 times quieter, and 5 decimal places more accurate than the "best" previous regulators. The Plus SRX is a dual mono design, with very low noise I/Cs, passive RIAA EQ circuit, an ultra linear gain amplifier; around which is an active lower frequency filter to roll off subsonics. The fourth stage is the super resolution output stage which lifts performance above what was possible from lower groove models.
40% OFF Retail demo stock $7,500.00
Audio Valve Sunilda Phono stage.
You can have 2 turntables connected at the same time.
This is a demo stock and will come with a 3month warranty.
Retails $4250 euro $6250 Australian.
Sellind for $5,750.oo
Technical Specifications: Gain: MM 41dB, MC 63dB ( 1Khz ) Input selectable LOAD resistors: 47 R, 100 R, 220 R, 470 R, 1 K, 47 K ( for MM only ) Input selectable LOAD capacitors: 0 p, 100 p, 220 p, 470p, 1000p, 0 p Frequency Response: 20Hz to 65 KHz +/- 3 dB Subsonic filter roll-off: 20 Hz Max output amplitude: 14V pk RIAA accuracy max.: +/- 0,18dB Distortion: MM 0,24 %, MC 0,32% (1Khz - 2V out) Noise: MM - 63dB, MC - 73dB Circuit type: 3 stages single ended, buffered ouputs RIAA network: passive Tubes: 2 x 6922 (6N1P), 2 x 12AX7 mode functions: Stand - by and mute functions Power supplies: high accuray solid state regulated Power transformer: outside housed and shielded Power requirements: 115/230 - 245 Ac - 50/60Hz Powerconsumption: Watts: 50 VA Dimensions: cm, W x H x D :42 * 32 * 14 (same as Eklipse) Weight: Kg: 20 kg
This unit is Black and silver.
Convergent Audio Technology JL2 Signature Mk 2 Stereo Amplifier
Thus, the JL2 Signature Mk 2 is big and heavy -- 18 1/2"W x 27"L x 10 1/2"H and 145 pounds 84 kg -- and the antithesis of the paperback-book-sized switching amps that are multiplying these days like mosquitoes after a summer rain.
The retail australian $22,000 new.
The unit is like new about 100 hour if not less.
Selling for $12,500.oo with 3month warranty
Audio Valve Assistant 100 pure class A amplifier
Demo stock retails The retail is 8750 euro which is $12,880.oo Australian.
Selling for $7,000 with 3month warranty Demo stock.
Colour black and silver
Technical facts power consumption: 500 - 800 va max., stand - by mode:300 va power output: 110 w sinus wave - 1khz / 1% dist. / 8 ohm load, per channel distortion 1khz / ohm: 2 watt - 0,06 % 10 watt - 0,06% 50 watt - 0,15 % 80 watt - 0,25 % !!! 110 watt - 1 % bandwide: - 1db / 45 khz, -3 db / 5 hz up to 60 khz damping: 8 ohm load - 50 s/n - ratio: better 80 db
Audio Valve Assistant 30 integrated amplifier
Technical. facts Push-Pull 2 * 40W Sound, Stereo Tube Integrated Amplifier Pure Class A operation - high precisition full automatic bias adjustment NOS SIEMENS germany military high grade power tubes 8 pcs. QQE 03-12 input tubes: 2*12AU7, 2*12AX7 Most of super Highend fans also know this 's from AudioValve, the highest grade of amp. 100% HAND MADE IN GERMANY, 100% NEW IN BOX main voltage: 110 V - 240VAC Frequency: 20Hz-50KHz +/-3 dB Signal/Noise Ratio: 90dB ALPS volume control pot Distortion: less than 1% at full power Input Jack: 5 pairs cinch, switchable REC - out burn in time: 50-100 hours Input Consumption: 150W Size Dimenson:220 mm wide x 360 deeph x 230 mm high Weight: 12kg Best of all: Germany's best address for output transformers - Pikatron - in collaboration with Audio Valve develop the ultimate higend output transformer designed for the Assistent 30 and gives the amp a superior sonic and hightech measurement characteristics. Colour black and silver
Retails 3700 euro Australian $5,500
Selling for $4,000australian with a 3month warranty.
Audio Valve challenger 115 push pull mono blocks.
110 watts class A mono.
Retail $8450 euro Australian dollar $12,880.oo
Brand new never opened $7990.oo 3month warranty.
Parallel-push-pull power amp with parallel-symetrical-cross- coupled driver stag 2*12AU7, 1*12AX7, 6*beam power pentode for example: KT 88, EL 34, 6550 ..... class - A 180 Watt (KT 88) 320 Watt - Stand by mode - 80 Watt 70 ampere between 2 ohm terminals 0 dBm 2 * 47K 2 - 4 - 6 - 8 ohm XLR & RCA input-jacket 5-40.000 hz 0,3% - 50 Watt (8 ohm load) 5 autom. contolled with "ABR" for all power tubes 43*28*24 cm, D-H-W 48 pound switchable
Colour black and silver
Audio Valve Baldur 70 mono blocks.
Pure class A 70 watts mono.
Brand new never opened.
Retail $8100 euro $11,900.oo
Selling for $6990.oo
Comes with a 3month warranty.
100-245 Volt 250 Watt 4* 6AS7G, 1*ECC83, 2*ECC82, 1*6N6P or 6 CG 7 Push-Pull – class A 70 Watt (8 ohm load, 1% dist.) 0.3% ( 50Watt/100Hz - 1KHz – 10KHz) 10Hz – 50KHz (8Ohm load) 20 (output Z= 0.4 Ohm) 0 dBm ( 775 mV) Yes, unique full automatic biasing for all powertube-triodes Black or silver colored case and chrom or gold terminals Width 32.5 cm; Depth 38.5 cm; High 30 cm 16 Kg W: 45cm; D: 52.5 cm; H: 50cm